1978 >> November >> Threadless Corner The Holley  

"Threadless Corner" -- The Holley
by Ray Klingensmith

Reprinted from "INSULATORS - Crown Jewels of the Wire", November 1978, page 4

This month, rather than just looking at another well known item, we'll take a look at the Holley (That's Holley, not Hawley!), which appears to have been designed to fit a threadless pin.

This insulator is very unique, in that it is triangular in shape. The purpose of its unusual form is to reduce the surface area between the tie wire and the insulator, and therefore reduce current leakage. This all sounds like a very good idea initially, but it seems that the sharp corners would be exceptionally prone to damage, which may ac- count for limited or non-existent sales of this item, and may explain the fact that none are known today. 



Large Image (73 Kb)



Large Image (150 Kb)

Autumn is upon us, so why not go out on a nice relaxing dig and turn one of these jewels up? It would make an exciting addition to any collection, especially to one with a few other "unthreaded" critters in it!

Having a serious interest in threadless insulators myself, I can't help but give a "threadless report" from the Eastern Regional held in August. (This show will be featured in the December issue of Crown Jewels. - Your Editor) That was one super show with a lot of activity going on. It got so busy at times, it was hard to elbow one's way through the crowd! Hats off to Doug and Charlie for a real super, super show. 

Now back to the threadless which were at the show. A few items present were: CD 744 large hat in super condition, the second known Bennington threadless, a really crude porcelain slashtop, CD 740's in various colors and embossings including a Dupont and Fosters, CD 701 in aqua, deep green and a beautiful green similar to 7-up, four different colors of 732's including an LGT CO, a milkglass CD 731 with a very interesting story behind it (The owner originally thought it was an inexpensive threaded porcelain, as it was still mounted on the original metal bracket; so he let it bounce around in the back of his truck for a month or so!). That thing sure was a beauty. Thanks to an old buddy for bringing that one to the show. Also present were a beautiful medium green 718 Tillotson and a 736 ERW. The Paul Plunkett family displayed their Wades, a beautiful group of glass. 

To those of you who missed the show, all I can say is make it to the next one!



| Magazine Home | Search the Archives |